Displayed prices differing from actual price.
Please contact us for quotation.
The Basler acA4096-11gm GigE camera with the Sony IMX267 CMOS sensor delivers 12 frames per second at 8.9 MP Resolution.
The ace acA4096-11gm profits from the same evolutionary steps in firmware
features as the ace U. Furthermore, it is capable of carrying
high resolution 9 and 12 MP Sony Pregius CMOS sensors with optical formats above 1“.
To accommodate these larger sensors, the camera housing is
slightly larger than other ace models and has a footprint of 40mm x 30 mm.
Highlights of the ace L
The ace series of cameras offer fantastic value. The acA4096-11gm is built on the Sony Pregius IMX267 1″ sensor. It offers 8.9 MP (4096 x 2160) resolution with excellent dynamic range and signal-to-noise ratio, making it ideal for machine vision and AOI installations.
Using a Power over Ethernet (“PoE”) configuration, a single cable may be used to apply camera power and to transfer data between this camera and a PC, keeping cable runs to a minimum. An auxiliary connector is provided for terminating the optically isolated input and output signals – there is one of each. The input may be configured to trigger image acquisition, reset the frame counter, or reset the software trigger count. The output may be configured to indicate acquisition trigger wait, exposure active, flash window, or timer active. Or the output may be controlled via a PC. This camera also has one TTL line that may be configured either as an input or an output. The auxiliary connector may be used to power the camera if PoE is not available.
The Basler ace provides a full set of features to address a wide range of applications. Pixel data can be output in 8 or 12 bit depth. You may adjust the camera’s black level, gain, area of interest, input debounce, and trigger delay. It features automatic exposure control, pixel binning, horizontal image mirroring, event reporting, sending of test images, and a programmable lookup table. There are also “chunk” features that include a frame counter, time stamp, trigger input counter, and CRC checksum calculator. Note that not all features may be available when using third-party software.
Because this camera is GigE Vision and GenICam complaint, there are many third party software applications and API’s that are compatible. Basler offers their royalty-free Pylon SDK for 32 and 64 bit Windows, Linux and OS X platforms.