U3-3090SE-C GigE uEye SE – High performance Standard Industrial IDS Camera

The USB3 Vision mechanical camera U3-3090SE-C with incorporated Sony IMX255 worldwide shade CMOS sensor meets every single modern prerequisite: high goals, high casing rates, commotion free picture proliferation. Readout clamor and dim current position among the least qualities in the whole sensor showcase. With its affectability in the close to infrared range, this camera offers a wide assortment of uses – with a goals of 9 MPix (4096 x 2160 px) at 45.0 fps.

The U3-3090SE-C is accessible in both monochrome and shading variations.

This camera model is bolstered by IDS Vision firmware 2.0 and higher.

GigE uEye SE – the latest generation of the proven allround industrial camera
Proven in industrial applications for over a decade. The completely redeveloped 4th generation of our gigabit ethernet “Standard Edition” of the uEye SE camera series is equipped with top quality sensors and new hardware for an even wider
range of variants and enhanced performance. All models are optionally equipped with the IDS Software Suite or support
for the GigE Vision Standards and truly set a new standard: diverse, versatile and user-friendly.

It is also compact, rugged, and a special sensor seal makes it extremely dust-proof. It is available optionally as a housing or board level version with a range of lens holder options; OEM variants are also possible. Besides the screwable RJ45 network connector, the U3-3090SE-C  uEye SE also has an 8-pin Hirose connector for trigger and flash (optically decoupled) and two GPIOs (each with 3.3 V), enabling many application functions for industrial use. The cameras can be operated with a 12-24 V power supply. The insulated PoE-construction (Power-over-Ethernet) enables single cable operation.

The post U3-3090SE-C : uEye SE appeared first on imRN Asia.

The USB3 Vision mechanical camera U3-3090SE-M with incorporated Sony IMX255 worldwide shade CMOS sensor meets every single modern prerequisite: high goals, high casing rates, commotion free picture proliferation. Readout clamor and dim current position among the least qualities in the whole sensor showcase. With its affectability in the close to infrared range, this camera offers a wide assortment of uses – with a goals of 9 MPix (4096 x 2160 px) at 45.0 fps.

The U3-3090SE-M is accessible in both monochrome and shading variations.

This camera model is bolstered by IDS Vision firmware 2.0 and higher.

GigE uEye SE – the latest generation of the proven allround industrial camera
Proven in industrial applications for over a decade. The completely redeveloped 4th generation of our gigabit ethernet “Standard Edition” of the uEye SE camera series is equipped with top quality sensors and new hardware for an even wider
range of variants and enhanced performance. All models are optionally equipped with the IDS Software Suite or support
for the GigE Vision Standards and truly set a new standard: diverse, versatile and user-friendly.

It is also compact, rugged, and a special sensor seal makes it extremely dust-proof. It is available optionally as a housing or board level version with a range of lens holder options; OEM variants are also possible. Besides the screwable RJ45 network connector, the U3-3090SE-M  uEye SE also has an 8-pin Hirose connector for trigger and flash (optically decoupled) and two GPIOs (each with 3.3 V), enabling many application functions for industrial use. The cameras can be operated with a 12-24 V power supply. The insulated PoE-construction (Power-over-Ethernet) enables single cable operation.

The post U3-3090SE-M : uEye SE appeared first on imRN Asia.

The Sony Pregius IMX252 is as one with its younger sibling IMX265 most likely the best CMOS picture sensor in the 3 MP class. The USB3 Vision modern camera U3-3070SE-C with the 1/1.8″ worldwide shade sensor transmits its goals of 3 MPix (2048 x 1536 px) with a casing pace of 114 fps by means of the USB interface. As far as powerful range, affectability and linearity, the camera is top notch and rouses modern clients in mechanical designing, metrology and clinical innovation.

The U3-3070SE-M is accessible in both monochrome and shading variations.

This camera model is upheld by IDS Vision firmware 2.0 and higher.

GigE uEye SE – the latest generation of the proven allround industrial camera
Proven in industrial applications for over a decade. The completely redeveloped 4th generation of our gigabit ethernet “Standard Edition” of the uEye SE camera series is equipped with top quality sensors and new hardware for an even wider
range of variants and enhanced performance. All models are optionally equipped with the IDS Software Suite or support
for the GigE Vision Standards and truly set a new standard: diverse, versatile and user-friendly.

It is also compact, rugged, and a special sensor seal makes it extremely dust-proof. It is available optionally as a housing or board level version with a range of lens holder options; OEM variants are also possible. Besides the screwable RJ45 network connector, the U3-3070SE-M uEye SE also has an 8-pin Hirose connector for trigger and flash (optically decoupled) and two GPIOs (each with 3.3 V), enabling many application functions for industrial use. The cameras can be operated with a 12-24 V power supply. The insulated PoE-construction (Power-over-Ethernet) enables single cable operation.

The post U3-3070SE-M : uEye SE appeared first on imRN Asia.

The Sony Pregius IMX252 is as one with its younger sibling IMX265 most likely the best CMOS picture sensor in the 3 MP class. The USB3 Vision modern camera U3-3070SE-C with the 1/1.8″ worldwide shade sensor transmits its goals of 3.15 MPix (2048 x 1536 px) with a casing pace of 114 fps by means of the USB interface. As far as powerful range, affectability and linearity, the camera is top notch and rouses modern clients in mechanical designing, metrology and clinical innovation.

Extraordinary capacities incorporate 2,000.0 ms long introduction and the linescan mode for utilizing the territory filter camera as a practical line examine camera elective.

The U3-3070SE-C is accessible in both monochrome and shading variations.

This camera model is upheld by IDS Vision firmware 2.0 and higher.

GigE uEye SE – the latest generation of the proven allround industrial camera
Proven in industrial applications for over a decade. The completely redeveloped 4th generation of our gigabit ethernet “Standard Edition” of the uEye SE camera series is equipped with top quality sensors and new hardware for an even wider
range of variants and enhanced performance. All models are optionally equipped with the IDS Software Suite or support
for the GigE Vision Standards and truly set a new standard: diverse, versatile and user-friendly.

It has been systematically designed to handle large area, high-resolution CMOS sensors and exploit the bandwidth of the GigE interface to the full. It is also compact, rugged, and a special sensor seal makes it extremely dust-proof. It is available optionally as a housing or board level version with a range of lens holder options; OEM variants are also possible. Besides the screwable RJ45 network connector, the U3-3070SE-C uEye SE also has an 8-pin Hirose connector for trigger and flash (optically decoupled) and two GPIOs (each with 3.3 V), enabling many application functions for industrial use. The cameras can be operated with a 12-24 V power supply. The insulated PoE-construction (Power-over-Ethernet) enables single cable operation.

The post U3-3070SE-C : uEye SE appeared first on imRN Asia.

Especially high-goals pictures with low clamor levels guarantee the catch of even littlest subtleties: the light-delicate IMX183 Rolling Shutter CMOS Sensor from Sony’s STARVIS arrangement gives remarkable picture quality significantly under low light conditions because of its BSI innovation (“posterior enlightenment”). With a goals of 20.44 MPix (5536 x 3692) at 2.4 µm pixels, it conveys 19.5 fps in the USB3 Vision mechanical camera U3-3800SE-C.

The camera is along these lines undeniably appropriate for complex picture examination in applications,

The U3-3800SE-C is accessible in monochrome or shading.

This camera model is upheld by IDS Vision firmware 2.2 and higher.

It is likewise reduced, tough, and an exceptional sensor seal makes it amazingly dust-evidence. It is accessible alternatively as a lodging or board level form with a scope of focal point holder choices; OEM variations are additionally conceivable. Other than the U3-3800SE-C screw mounting, the uEye SE additionally has a 8-pin Hirose connector for trigger and blaze (optically decoupled) and two GPIOs , empowering numerous application capacities for mechanical use. with USB Power Delivery IDS offers a variable force supply at the I/O port which can be utilized to control a LED light source. This lessens the requirement for links and force packs, thus spares time and money.

The post U3-3800SE-C : uEye SE appeared first on imRN Asia.

Especially high-goals pictures with low clamor levels guarantee the catch of even littlest subtleties: the light-delicate IMX183 Rolling Shutter CMOS Sensor from Sony’s STARVIS arrangement gives remarkable picture quality significantly under low light conditions because of its BSI innovation (“posterior enlightenment”). With a goals of 20.44 MPix (5536 x 3692) at 2.4 µm pixels, it conveys 19.5 fps in the USB3 Vision mechanical camera U3-3800SE-M.

The camera is along these lines undeniably appropriate for complex picture examination in applications,

The U3-3800SE-M is accessible in monochrome or shading.

This camera model is upheld by IDS Vision firmware 2.2 and higher.

It is likewise reduced, tough, and an exceptional sensor seal makes it amazingly dust-evidence. It is accessible alternatively as a lodging or board level form with a scope of focal point holder choices; OEM variations are additionally conceivable. Other than the U3-3800SE-M screw mounting, the uEye SE additionally has a 8-pin Hirose connector for trigger and blaze (optically decoupled) and two GPIOs , empowering numerous application capacities for mechanical use. with USB Power Delivery IDS offers a variable force supply at the I/O port which can be utilized to control a LED light source. This lessens the requirement for links and force packs, thus spares time and money.

The post U3-3800SE-M : uEye SE appeared first on imRN Asia.

The USB3 Vision modern camera U3-3000SE-C  with the enormous configuration 1.1″ CMOS sensor IMX253 conveys well honed, clear and commotion free 32.0 fps at full goals (12.29 MPix, 4096 x 3000 px) by means of its USB interface. The U3-3000SE-C is essentially utilized in great machine vision applications where quick articles must be caught or in microscopy where especially high affectability is required. Its amazingly low dim commotion makes the camera additionally appropriate for applications in biosciences.

The U3-3000SE-C is accessible in both monochrome and shading variations.

This camera model is upheld by IDS Vision firmware 2.0 and higher.

It is likewise reduced, tough, and an uncommon sensor seal makes it amazingly dust-verification. It is accessible alternatively as a lodging or board level adaptation with a scope of focal point holder choices; OEM variations are likewise conceivable. Other than the USB screw mounting, the uEye SE likewise has a 8-pin Hirose connector for trigger and glimmer (optically decoupled) and two GPIOs (each with 3.3 V), empowering numerous application capacities for mechanical use. Likewise for the U3-3000SE-C uEye SE mechanical camera, with USB Power Delivery IDS offers a variable force supply at the I/O port which can be utilized to control a LED light source or a light boundary. This decreases the requirement for links and influence packs, thus sets aside time and cash.

The post U3-3000SE-C : uEye SE appeared first on imRN Asia.

The USB3 Vision modern camera U3-3000SE-M with the enormous configuration 1.1″ CMOS sensor IMX253 conveys well honed, clear and commotion free 32.0 fps at full goals (12.29 MPix, 4096 x 3000 px) by means of its USB interface. It meets the most noteworthy prerequisites for goals, speed and picture quality and dazzles with its specialized qualities, for example, affectability.  The U3-3000SE-M is essentially utilized in great machine vision applications where quick articles must be caught or in microscopy where especially high affectability is required. Its amazingly low dim commotion makes the camera additionally appropriate for applications in biosciences.

The U3-3000SE-M is accessible in both monochrome and shading variations.

This camera model is upheld by IDS Vision firmware 2.0 and higher.

It is likewise reduced, tough, and an uncommon sensor seal makes it amazingly dust-verification. It is accessible alternatively as a lodging or board level adaptation with a scope of focal point holder choices; OEM variations are likewise conceivable. Other than the USB3.1 screw mounting, the uEye SE likewise has a 8-pin Hirose connector for trigger and glimmer (optically decoupled) and two GPIOs (each with 3.3 V), empowering numerous application capacities for mechanical use. Likewise for the U3-3000SE-M uEye SE mechanical camera, with USB Power Delivery IDS offers a variable force supply at the I/O port which can be utilized to control a LED light source or a light boundary. This decreases the requirement for links and influence packs, thus sets aside time and cash.

The post U3-3000SE-M : uEye SE appeared first on imRN Asia.

The UI-3040SE-M with the worldwide shade CMOS sensor Sony IMX273 accomplishes great 243 fps with a goals of 1.57 MPix at 3.45 pixel size.

The modern camera model UI-3040SE-M is aimed at clients with levels of popularity on picture quality, powerful range and affectability.

Compact and robust: The uEye SE  is the all-round industrial camera with a broad sensor portfolio and countless variants. It has proven itself in industrial use for over a decade. It is consistently designed to support even large-format and fast CMOS sensors and to make best use of the bandwidth of the USB 3 (5 Gbps) interface.
In addition to a screwable USB Type-C connector, the uEye SE with USB 3 (5 Gbps) interface has a screwable 8-pin Hirose connector for trigger and flash (optically decoupled) as well as two GPIOs (each with 3.3 V). This makes them a popular choice for a wide range of applications in single or multi-camera operation. The integrated pixel pre-processing reduces the load on the host PC.

The UI-3040SE-M modern camera model focuses on clients with levels of popularity on picture quality, powerful range and affectability.

It is likewise minimal, tough, and an extraordinary sensor seal makes it incredibly dust-verification. It is accessible alternatively as a lodging or board level form with a scope of focal point holder choices; OEM variations are likewise conceivable.

The industrial camera model UI-3040SE is directed at customers with high demands on image quality, dynamic range and sensitivity.

The post UI-3040SE-M : uEye SE appeared first on imRN Asia.

The UI-3040SE-C with the worldwide shade CMOS sensor Sony IMX273 accomplishes great 243 fps with a goals of 1.57 MPix at 3.45 pixel size. This makes it perfect for exemplary mechanical applications, for example, surface review, yet in addition for nitty gritty picture investigation in clinical innovation and traffic applications.

The camera empowers 4x multi AOI and long introduction as long as 30 seconds – for applications in the fields of mechanical building, machine vision, estimating innovation, clinical innovation or microscopy. The modern camera model UI-3040SE-C is aimed at clients with levels of popularity on picture quality, powerful range and affectability.

The UI-3040SE-C modern camera model focuses on clients with levels of popularity on picture quality, powerful range and affectability.

The UI-3040SE-C is accessible in both monochrome and shading renditions. The industrial camera model UI-3040SE is directed at customers with high demands on image quality, dynamic range and sensitivity.

It is likewise minimal, tough, and an extraordinary sensor seal makes it incredibly dust-verification. It is accessible alternatively as a lodging or board level form with a scope of focal point holder choices; OEM variations are likewise conceivable. This lessens the requirement for links and influence packs, thus sets aside time and cash.

The post UI-3040SE-C : uEye SE appeared first on imRN Asia.