The WAT-910HX/RC 570TVL Camera from Watec operates on standard illumination of 0.0001 lux and 0.000005 lux (integrated frame technology). It is designed to adjust frame loss compensation based on the lighting conditions of your environment. This unit is fully adjustable to meet the requirements of your dark or lighted application and can be pre-calibrated by the user to ensure the highest quality imaging experience.

Characteristics & functions 

• 3D Noise Reduction (3DNR)
• Low Light Sensitivity/0.000005 lx. (F1.4, Slow shutter mode: 256 fields)
• On Screen Display Contorlled by Jog Dial Switch On-Camera
• Digital Wide Dynamic Range
• Dead pixels correction
• Motion detection

Specifications

• Effective Pixels: 752(H)x582(V)
• Resolution: 570TVL
• AGC LO:6～30dB MID:6～34dB HIGH:6～41dB
• S/N ratio : 52dB
• Shutter speed／EI（1/50～1/100,000 to 256 fields) & Fixed  shutter mode
• Weight 85g

Watec and Mintron cameras are amazingly delicate simple camcorders with a CCD microlens chip. They are broadly found in stargazing as they are undeniably appropriate for live review of DSOs, and photography of meteors and for minor planet occultations. The Watec is the replacement to the Mintron camera.

• Achieves minimum illumination performance by 1/2-inch high sensitive CCD sensor and our unique circuit design
• Min. illumination 0.0000025 lx F1.4 (AGC HIGH=41dB, Shutter=x256, γ=0.35, NR=ON)
• High quality image without noise under poor light condition
• Advanced setting available by OSD (On Screen Display) through a remote control provided in kit
• RS-485 and 1/3″ available MTO

The post WAT-910HX/RC appeared first on imRN Asia.

Low-light camera in Deep dark night. 3D Noise Reduction (3DNR). Low Light Sensitivity/0.000005 lx. (F1.4, Slow shutter mode: 256 fields). On Screen Display Contorlled by Jog Dial Switch On-Camera. Digital Wide Dynamic Range. Dead pixels correction. Motion detection. Lens Optional

Characteristics & Functions

• 3D Noise Reduction (3DNR)
• Low Light Sensitivity/0.0000025 lx.
• (F1.4, Slow shutter mode: 256 fields)
• On Screen Display Contorlled by Jog Dial Switch On-Camera
• Digital Wide Dynamic Range
• Dead pixels correction
• Motion detection

Specifications:

• Effective Pixels: 752(H)x582(V)
• Resolution: 570TVL
• AGC LO:6～30dB MID:6～34dB HIGH:6～41dB
• S/N ratio : 52dB
• Shutter speed／EI（1/50～1/100,000 to 256 fields) & Fixed
• shutter mode
• Weight 85g

Watec is proud to introduce the new WAT-910HX super low light black and white camera. At a standard 0.0001LUX and 0.000005LUX (integrated frame technology) this camera is designed to adjust via frame loss compensation based on the lighting conditions of your environment. This unit is fully adjustable to meet the requirements of your dark or lighted application and can be pre-calibrated by the user to ensure the highest qualiy imaging experience.

The post WAT-910HX appeared first on imRN Asia.

Characteristics & functions Watec WAT-902H3 SUPREME camera

• Improved WAT-902H
• Super High sensitivity(Near IR spectrum)
• BNC connector
• Video/DC iris auto-select
• Flickerlesss mode
• Compact & lightweight
• Shutter speed control
• Electronic iris
• AGC
• Flickerless mode
• Back light compensation
• Video/DC iris auto-select
• Iris level control

Watec WAT-902H3 supreme camera specifications

• Effective pixels: 380k(E), 440k(C)
• Resolution: 570TVL
• Minimum illumination: 0.0003 lx. F1.4(2), 0.0005 lx. F1.4(3)
• Gain control: AGC(HI:5-50dB, LO:5-32dB)
• Back light compensation: ON
• S/N ratio: 46dB
• Shutter speeds: EI(1/60(E) or 1/50(C)-1/100,000), FL, OFF
• Weight: 90g

The post WAT-902H3 SUPREME appeared first on imRN Asia.

WATEC MONOCHROME CAMERA 1/2″ 

Characteristics & functions Watec WAT-902H2 SUPREME camera

• Improved WAT-902H
• Super High sensitivity(Near IR spectrum)
• BNC connector
• Video/DC iris auto-select
• Flickerlesss mode
• Compact & lightweight
• Shutter speed control
• Electronic iris
• AGC
• Flickerless mode
• Back light compensation
• Video/DC iris auto-select
• Iris level control

Watec WAT-902H2 SUPREME camera specifications

• Effective pixels: 380k(E), 440k(C)
• Resolution: 570TVL
• Minimum illumination: 0.0003 lx. F1.4(2), 0.0005 lx. F1.4(3)
• Gain control: AGC(HI:5-50dB, LO:5-32dB)
• Back light compensation: ON
• S/N ratio: 46dB
• Shutter speeds: EI(1/60(E) or 1/50(C)-1/100,000), FL, OFF
• Weight: 90g

The Watec WAT-902H2 SUPREME is an ultra compact, high performance CCTV camera capable of producing and maintaining the level of image quality expected in critical 24-hour security environments. This is achieved through the use of a 1/2″ CCD along with a number of internal electronic controls and an auto iris function. These outstanding capabilities coupled with the camera’s absolutely small size make it a particularly wise choice for applications requiring dependable yet minimally intrusive round-the-clock security monitoring.

Some of the key differences between a Supreme and Ultimate model camera include a slightly higher light sensitivity (on the Ultimate model), manual gain control, manual back-light compensation, better signal to noise ratio and a more versatile electronic shutter function (see specs).

The post WAT-902H2 SUPREME appeared first on imRN Asia.

Key Features

• 1/2″ CCD
• 570 Lines
• 0.003 Lux
• Composite Video Output

High sensitivity Shutter speed control Electronic iris Flickerless mode Back light compensation AGC Gamma correction 1/2 Monochrome camera. High sensitivity. Shutter speed control. Electronic iris. Flickerless mode. Back light compensation. AGC. Gamma correction. Lens Optional. The combination of a 1/2″ CCD, an auto iris function and a wealth of electronic picture controls allow the camera to produce visible images in light levels as low as 0.003 lux (F1.4).

Specifications

• Effective pixels: 380k(N), 440k(P)
• Resolution: 570TVL
• Minimum illumination: 0.003 lx. F1.4
• Back light compensation: ON/OFF
• Gain control: AGC ON(HI:5-32dB, LO:5-20dB), OFF
• S/N ratio: 50dB
• Shutter speeds: EI(1/60(N) or 1/50(P)-1/100,000), FL, OFF
• Gamma: γ≈0.45/1.0
• Gamma: 0.35/0.45/1.0
• Weight: 84g

The Watec WAT-902B is a small and light CCTV box camera that features a 1/2″ CCD sensor, auto iris function, and a full complement of electronic controls. Working in concert, these allow the camera to produce visible images in light levels down to 0.003 lux. This level of low light sensitivity coupled with its compact form factor makes it suitable for commercial applications looking for dependable yet minimally intrusive round-the-clock security monitoring.

The post WAT-902B appeared first on imRN Asia.

1/3″ Monochrome camera. Internal sync. / external sync.(C. video, C. sync.). Manual gain control. hutter speed control (10 steps). Electronic iris. Flickerless mode. Back light compensation. AGC. Manual gain control. Video/DC iris auto-select. Gamma correction. Iris level control. Lens Optional

WAT-535EX2 Characteristics & functions

– Internal sync. / external sync.(C. video, C. sync.)
– Manual gain control
– hutter speed control (10 steps)
– Electronic iris
– Flickerless mode
– Back light compensation
– AGC
– Manual gain control
– Video/DC iris auto-select
– Gamma correction
– Iris level control

Specifications

• Effective pixels: 380k(N), 440k(P)
• Resolution: 570TVL
• Minimum illumination: 0.003 lx. F1.4
• Gain control: AGC(HI:5-32dB, LO:5-20dB), MGC(5-32dB)
• Back light compensation: ON(AGC/EI), OFF
• S/N ratio: 54dB
• Shutter speeds: EI(1/60(N) or 1/50(P)-1/100,000), FL, OFF, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/100,000
• Gamma: 0.45/1.0
• Weight: 125g

WAT-535EX2 Specifications

High Sensitivity & External Synchronization w/ Manual Gain Control and external dipswitch adjustments. Quick Specs: Effective Pixels: 380k, Scanning system: 2:1 Interlace Synchronizing system: Internal / External (Auto-Select) Gain Control: AGC ON: 5~32dB(HI), 5~20dB(LO), OFF: 5~32dB(MGC) Min. Illumination: 0.003 Lux @ F1.4, gamma Correction: ?=0.45 (ON) / ?=1.0 (OFF)B.L.C: OFF S/N Ratio: 54dB, Shutter Speeds: EI:1/60 ~ 1/100,000 sec., FL: 1/100 sec., OFF:1/60 sec., ES:(1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/100000 sec.) Weight:125g

The post WAT-535EX2 appeared first on imRN Asia.

Key features

• Min. illumination 0.00009 lx F1.8 (AGC ON=48dB, Shutter=x8)
• Advanced setting available by OSD (On Screen Display) through an optional remote control
• Build-in M12 lens G3.7 (f=3.7mm F1.8), Various Optional M12 lenses available
• Glass lenses and pinhole lens are not interchangeable

WAT-910HX MBD (G 3.7) – 1/3\” CCD Super Hight Sensitivity Miniature Board Camera

• 1/3\” CCD Sensor, Low light Sensitivity 0.00009 lx F1.6 (AGC 48dB, Sens UP ON)
• Advanced setting available by OSD (On-Screan-Display) through an optional controller
• Build-in M12 Lens G3.7 (f=\”3.7mm\” F1.8). Various optional M12 lenses available. Miniature pinhole lenses cannot be interchanged with miniature glass lenses and vice versa

Watec WAT-910HX MBD (G3.7) Characteristics & Functions Watec 1/3” Super High Sensitivity Miniature Board Camera

Specifications

• Sensor : 1/3\” CCD
• Pixels : 795(H) x 595(V)
• Video OUTPUT : Composite
• Resolution : More than 570TVL (center)
• Sensibility : 0.00009 lux F1.8 (AGC=\”48dB,\” Sens UP ON)
• OSD (On Sreen Display) : operated by optional remote controller
• AE mode :
• Fixed : 1/50, 1/100, 1/250, 1/500, 1/1000, 1/10000, 1/100000 sec
• E.I. : 8FLD – 1/100000 sec (Sens UP ON)
• MGC : 6,12, 18, 24, 30, 16, 42, 48dB
• Noise reduction : 2D+3DNR (Level Selectable)
• WDR : ON(ATR), OFF
• Motion Detection : ON/OFF
• Back Light Compensation : OFF/BLC/HLC
• Defog : ON (Level Selectable)/OFF
• Digital Zoom : ON (x1 – x256 Magnification selectable) / OFF
• Privacy Masks : 15 Masks
• Mirror Image : OFF/Horizontal-Flip/Vertical-FLIP/HV-FLIP
• Sharpness : 0-15
• Power Supply : 12VDC
• Power Consumption : 0,96W (80mA)
• Lens Mount : M12 P=\”0.5
• Standard Lens : M3718BC-12 (f3.7 F1.8)

Watec is proud to introduce the new MBD series to our WAT-910HX super low light black and white camera line.

The standard 0.0001LUX (F1.2) and 0.000005LUX (integrated frame technology) this camera is designed to adjust via frame loss compensation based on the lighting conditions of your environment. This unit is fully adjustable to meet the requirements of your dark or lighted application and can be pre-calibrated by the user to ensure the highest quality imaging experience.

The post WAT-910HX MBD (G3.7) appeared first on imRN Asia.

Ultra compact design only 23x23mm for limited space and embedded application

Characteristics and functions

• 1/3″ CCD Sensor, Low light Sensitivity 0.00009 lx F1.8 (AGC 48dB, Sens UP ON)
• Advanced setting available by OSD (On-Screan-Display) through an optional controller
• Build-in M12 Lens P3.3 (f=”3.3mm” F2.4). Various optional M12 lenses available. Miniature pinhole lenses cannot be interchanged with miniature glass lenses and vice versa.

Specifications

• Sensor : 1/3″ CCD
• Pixels : 795(H) x 595(V)
• Video OUTPUT : Composite
• Resolution : More than 570TVL (center)
• Sensibility : 0.00009 lux F1.8 (AGC=”48dB,” Sens UP ON)
• OSD (On Sreen Display) : operated by optional remote controller
• AE mode : -Fixed : 1/50, 1/100, 1/250, 1/500, 1/1000, 1/10000, 1/100000 sec  -E.I. : 8FLD – 1/100000 sec (Sens UP ON)
• MGC : 6,12, 18, 24, 30, 16, 42, 48dB
• Noise reduction : 2D+3DNR (Level Selectable)
• WDR : ON(ATR), OFF
• Motion Detection : ON/OFF
• Back Light Compensation : OFF/BLC/HLC
• Defog : ON (Level Selectable)/OFF
• Digital Zoom : ON (x1 – x256 Magnification selectable) / OFF
• Privacy Masks : 15 Masks
• Mirror Image : OFF/Horizontal-Flip/Vertical-FLIP/HV-FLIP
• Sharpness : 0-15
• Power Supply : 12VDC
• Power Consumption : 0,96W (80mA)
• Lens Mount : M12 P=”0.5
• Standard Lens : DW-33524A (f3.3 F2.4)

The Watec WAT-910HX MBD P3.3 is fully adjustable and designed to meet highly concealable requirements in a low light miniature unit, this camera is available in conical pinhole and the standard “G” series as well.

It features a black and white CCD, composite BNC output, WDR with 3d noise reduction, auto slow shutter model and 570 TV lines at 0.000005 lux.

The post WAT-910HX MBD (P3.3) appeared first on imRN Asia.

WAT-910BD : 1/2” Ultra High Sensitivity Dark-field Camera

The post WAT-910BD appeared first on imRN Asia.

1/3″ 570TVL, Super High Sensitivity Adjacent to Near Infra-Red Ray Exposed Single PC Board 440k High:5~50dB Low:5~32dB Internal 0.0003, DC+12V±10% 12VDC

• Effective Pixels: 380k
• Scanning system: 2:1 Interlace
• Synchronizing system: Internal
• Gain Control: AGC HI:5~50B, LO: 5~32Db, [(OFF=5dB)]*
• Gamma Correction: γ≒0.45, [(γ≒1.0]*
• Min. Illumination: 0.0006Lux @ F1.4
• B.L.C.: ON/OFF

• Shutter Speed: EI(1/60~1/100,000), [ES(OFF:1/60, FL:1/100, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, or 1/100000)]*
• S/N Ratio: 50dB
• Weight: 25g
• CCD: 1/3″
• Resolution: 570TVL
• Power: DC+12V±10% 12VDC

1/3” High Sensitivity Monochrome Board Camera. Equality performance on Near IR sensitivity. Selectable camera settings for demanding scene conditions. Electric iris, electric shutter, AGC, BLC and gamma switching

WAT-902HB3S Description

This is Watecs 1/3 CCD, 40x40mm, extremely low light monochrome board camera, PERFECT for covert installations and systems integration where low light viewing is your goal. Unlike some of our other options, this camera is set for easy installs and does not offer access to OSD or other functionality settings, making it a great fit for those situations where simplicity in extreme low light viewing is your goal.

The post WAT-902HB3S appeared first on imRN Asia.