BOA1936-400CC : Basler boost R

The Sony IMX421 CMOS sensor in the Basler CoaXPress 2.0 BOA1936-400CC camera produces 400 frames per second at 3 MP resolution.

The boost series is available with different lens mounts (C-mount, F-mount and M42-mount). These must be purchased separately for the camera.

Basler boost

Mechanical drawing for BOA1936-400CC

The post boA1936-400cc appeared first on imRN Asia.

BOA1936-400CM : Basler boost R

The Sony IMX421 CMOS sensor in the Basler CoaXPress 2.0 BOA1936-400CM camera produces 400 frames per second at 3 MP resolution.

The boost series is available with different lens mounts (C-mount, F-mount and M42-mount). These must be purchased separately for the camera.

Basler boost

Mechanical drawing for BOA1936-400CM

The post boA1936-400cm appeared first on imRN Asia.

The Sony Pregius IMX252 is as one with its younger sibling IMX265 most likely the best CMOS picture sensor in the 3 MP class. The USB3 Vision modern camera U3-3070SE-C with the 1/1.8″ worldwide shade sensor transmits its goals of 3 MPix (2048 x 1536 px) with a casing pace of 114 fps by means of the USB interface. As far as powerful range, affectability and linearity, the camera is top notch and rouses modern clients in mechanical designing, metrology and clinical innovation.

The U3-3070SE-M is accessible in both monochrome and shading variations.

This camera model is upheld by IDS Vision firmware 2.0 and higher.

GigE uEye SE – the latest generation of the proven allround industrial camera
Proven in industrial applications for over a decade. The completely redeveloped 4th generation of our gigabit ethernet “Standard Edition” of the uEye SE camera series is equipped with top quality sensors and new hardware for an even wider
range of variants and enhanced performance. All models are optionally equipped with the IDS Software Suite or support
for the GigE Vision Standards and truly set a new standard: diverse, versatile and user-friendly.

It is also compact, rugged, and a special sensor seal makes it extremely dust-proof. It is available optionally as a housing or board level version with a range of lens holder options; OEM variants are also possible. Besides the screwable RJ45 network connector, the U3-3070SE-M uEye SE also has an 8-pin Hirose connector for trigger and flash (optically decoupled) and two GPIOs (each with 3.3 V), enabling many application functions for industrial use. The cameras can be operated with a 12-24 V power supply. The insulated PoE-construction (Power-over-Ethernet) enables single cable operation.

The post U3-3070SE-M : uEye SE appeared first on imRN Asia.

The Sony Pregius IMX252 is as one with its younger sibling IMX265 most likely the best CMOS picture sensor in the 3 MP class. The USB3 Vision modern camera U3-3070SE-C with the 1/1.8″ worldwide shade sensor transmits its goals of 3.15 MPix (2048 x 1536 px) with a casing pace of 114 fps by means of the USB interface. As far as powerful range, affectability and linearity, the camera is top notch and rouses modern clients in mechanical designing, metrology and clinical innovation.

Extraordinary capacities incorporate 2,000.0 ms long introduction and the linescan mode for utilizing the territory filter camera as a practical line examine camera elective.

The U3-3070SE-C is accessible in both monochrome and shading variations.

This camera model is upheld by IDS Vision firmware 2.0 and higher.

GigE uEye SE – the latest generation of the proven allround industrial camera
Proven in industrial applications for over a decade. The completely redeveloped 4th generation of our gigabit ethernet “Standard Edition” of the uEye SE camera series is equipped with top quality sensors and new hardware for an even wider
range of variants and enhanced performance. All models are optionally equipped with the IDS Software Suite or support
for the GigE Vision Standards and truly set a new standard: diverse, versatile and user-friendly.

It has been systematically designed to handle large area, high-resolution CMOS sensors and exploit the bandwidth of the GigE interface to the full. It is also compact, rugged, and a special sensor seal makes it extremely dust-proof. It is available optionally as a housing or board level version with a range of lens holder options; OEM variants are also possible. Besides the screwable RJ45 network connector, the U3-3070SE-C uEye SE also has an 8-pin Hirose connector for trigger and flash (optically decoupled) and two GPIOs (each with 3.3 V), enabling many application functions for industrial use. The cameras can be operated with a 12-24 V power supply. The insulated PoE-construction (Power-over-Ethernet) enables single cable operation.

The post U3-3070SE-C : uEye SE appeared first on imRN Asia.

The USB 3.1 Gen 1 modern camera UI-3070SE-C with 1/1.8″ Sony IMX252 worldwide shade CMOS sensor gives a goals of 3.17 MPix (2056 x 1542 px). At full goals, the USB 3.1 Gen 1 camera accelerates to 123 fps.

The UI-3070SE-C modern camera model focuses on clients with levels of popularity on picture quality, powerful range and affectability.

The UI-3070SE-C is accessible in both monochrome and shading renditions.

It is likewise minimal, tough, and an extraordinary sensor seal makes it incredibly dust-verification. It is accessible alternatively as a lodging or board level form with a scope of focal point holder choices; OEM variations are likewise conceivable. Other than the USB screw mounting, the UI-3070SE-C additionally has a 8-pin Hirose connector for trigger and glimmer (optically decoupled) and two GPIOs (each with 3.3 V), empowering numerous application capacities for modern use. This lessens the requirement for links and influence packs, thus sets aside time and cash.

The USB 3 industrial camera UI-3070SE with 1/1.8″ Sony IMX252 global shutter CMOS sensor provides a resolution of 3.17 MPix (2056 x 1542 px). At full resolution, the USB 3 camera speeds up to 123 fps.

The UI-3070SE industrial camera model aims at customers with high demands on image quality, dynamic range and sensitivity.

The post UI-3070SE-C : uEye SE appeared first on imRN Asia.

The USB 3.1 Gen 1 modern camera UI-3070SE-M with 1/1.8″ Sony IMX252 worldwide shade CMOS sensor gives a goals of 3.17 MPix (2056 x 1542 px). At full goals, the USB 3.1 Gen 1 camera accelerates to 123 fps. It permits multi AOI and long presentation up to 30,000.0 ms, for applications in the fields of mechanical building, machine vision, metrology, clinical designing, or microscopy.

The UI-3070SE-M modern camera model focuses on clients with levels of popularity on picture quality, powerful range and affectability.

The UI-3070SE-M is accessible in both monochrome and shading renditions.

It is likewise minimal, tough, and an extraordinary sensor seal makes it incredibly dust-verification. It is accessible alternatively as a lodging or board level form with a scope of focal point holder choices; OEM variations are likewise conceivable. Other than the USB screw mounting, the UI-3070SE-M additionally has a 8-pin Hirose connector for trigger and glimmer (optically decoupled) and two GPIOs (each with 3.3 V), empowering numerous application capacities for modern use. This lessens the requirement for links and influence packs, thus sets aside time and cash.  At full resolution, the USB 3 camera speeds up to 123 fps.

The UI-3070SE industrial camera model aims at customers with high demands on image quality, dynamic range and sensitivity.

The post UI-3070SE-M : uEye SE appeared first on imRN Asia.

The  camera U3-3270SE-C with the 1/1.8″ worldwide shade sensor transmits its goals of 3.15 MPix (2048 x 1536 px) with an edge pace of 58.0 fps by means of the USB interface. As far as powerful range, affectability and linearity, the camera is best in class and rouses modern clients in mechanical designing, metrology and clinical innovation.

Unique capacities incorporate 2,000.0 ms long introduction and the linescan mode for utilizing the region filter camera as a financially savvy line examine camera elective.

The U3-3270SE-C is accessible in both monochrome and shading variations.

It is in like manner decreased, unpleasant, and a phenomenal sensor seal makes it incredibly dust-confirmation. It is available on the other hand as a housing or board level version with an extent of point of convergence holder decisions; OEM varieties are in like manner possible. Other than the USB3.1 screw mounting, the U3-3270SE-C also has a 8-pin Hirose connector for trigger and burst (optically decoupled) and two GPIOs, enabling various application capacities with respect to mechanical use. with USB Power Delivery IDS offers a variable power supply at the I/O port which can be used to control a LED light source or a light obstacle. This decreases the prerequisite for connections and impact packs, along these lines puts aside time and money.

The post U3-3270SE-C : uEye SE appeared first on imRN Asia.

The  camera U3-3270SE-M with the 1/1.8″ worldwide shade sensor transmits its goals of 3.15 MPix (2048 x 1536 px) with an edge pace of 58.0 fps by means of the USB interface. As far as powerful range, affectability and linearity, the camera is best in class and rouses modern clients in mechanical designing, metrology and clinical innovation.

Unique capacities incorporate 2,000.0 ms long introduction and the linescan mode for utilizing the region filter camera as a financially savvy line examine camera elective.

The U3-3270SE-M is accessible in both monochrome and shading variations.

It is in like manner decreased, unpleasant, and a phenomenal sensor seal makes it incredibly dust-confirmation. It is available on the other hand as a housing or board level version with an extent of point of convergence holder decisions; OEM varieties are in like manner possible. Other than the USB3.1 screw mounting, the U3-3270SE-M also has a 8-pin Hirose connector for trigger and burst (optically decoupled) and two GPIOs (each with 3.3 V), enabling various application capacities with respect to mechanical use. with USB Power Delivery IDS offers a variable power supply at the I/O port which can be used to control a LED light source or a light obstacle. This decreases the prerequisite for connections and impact packs, along these lines puts aside time and money.

The post U3-3270SE-M : uEye SE appeared first on imRN Asia.

STC-SBS312POE:1/1.8″ CMOS, Mono, 3 M, Global, GigE, 33fps

The STC-SBS312POE is part of Sentech’s Brand New Power over Ethernet High Speed GigE camera series. It features a 1/1.8″ mono SXGA sensor, 33fps and communication over a 6 pin Hirose or Ethernet connector. The STC-SBS312POE  boasts a compact 35(w) x 35(H) x 55.9 (D) mm size, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam, and is compatible with all standard industry drivers. The GigE PoEHS series is available now at an extremely low cost.

• User Programmable AOI
• High Speed Power Over Ethernet
• 3 Megapixel Resolution with 33 fps                                                                                                                         
• Sentech STC-SBS312POE
• SXVGA, Color Camera. The STC-SBS312POE is part of Sentech’s Brand New Power over Ethernet High Speed GigE camera series. It features a 1/1.8″ mono SXGA sensor, 33fps and communication over a 6 pin Hirose or Ethernet connector. The STC-SBS312POE  boasts a compact 35(w) x 35(H) x 55.9 (D) mm size, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision® and GenICam, and is compatible with all standard industry drivers. The GigE PoEHS series is available now at an extremely low cost.

The post STC-SBS312POE appeared first on imRN Asia.

The post STC-MCS322U3V appeared first on imRN Asia.