The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

FL3-GE-50S5M-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

• Sony progressive scan CCD image sensors, mono or color
• GigE Vision Compliant, 1000 Mbit/s interface
• Compact 29 x 29 x 30 mm case

There are twelve monochrome and color CCD versions in the Point Grey Flea3, ranging from VGA to 5.0 MP. The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-50S5M-C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

• Sony progressive scan CCD image sensors, mono or color
• GigE Vision Compliant, 1000 Mbit/s interface
• Compact 29 x 29 x 30 mm case

FL3-GE-50S5C-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3, ranging from VGA to 5.0 MP. The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-50S5C-C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

• Sony progressive scan CCD image sensors, mono or color
• GigE Vision Compliant, 1000 Mbit/s interface
• Compact 29 x 29 x 30 mm case

FL3-GE-28S4M-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3. The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-28S4M-C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

• Sony progressive scan CCD image sensors, mono or color
• GigE Vision Compliant, 1000 Mbit/s interface
• Compact 29 x 29 x 30 mm case

FL3-GE-28S4C-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3. The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-28S4C-C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

FL3-GE-20S4M-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3. The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-20S4M-C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

• Sony progressive scan CCD image sensors, mono or color
• GigE Vision Compliant, 1000 Mbit/s interface
• Compact 29 x 29 x 30 mm case

FL3-GE-14S3M-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3 . The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-14S3M-C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

• Sony progressive scan CCD image sensors, mono or color
• GigE Vision Compliant, 1000 Mbit/s interface
• Compact 29 x 29 x 30 mm case

FL3-GE-14S3C-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3. The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-14S3C-C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

• Sony progressive scan CCD image sensors, mono or color
• GigE Vision Compliant, 1000 Mbit/s interface
• Compact 29 x 29 x 30 mm case

FL3-GE-13S2M-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 3 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3. the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-13S2M-C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

• Sony progressive scan CCD image sensors, mono or color
• GigE Vision Compliant, 1000 Mbit/s interface
• Compact 29 x 29 x 30 mm case

FL3-GE-13S2C-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3. The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-13S2C-C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

• Sony progressive scan CCD image sensors, mono or color
• GigE Vision Compliant, 1000 Mbit/s interface
• Compact 29 x 29 x 30 mm case

FL3-GE-08S2M-C With resolutions ranging the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3. The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-08S2M-C appeared first on imRN Asia.