The Flir Oryx ORX-10GS-32S4C-C features a Sony IMX252 camera, 3.2 Megapixels, and 216 frames per second. The award-winning Oryx 10GigE camera family enables device designers to take advantage of the latest sensors by promoting transfer speeds of up to 10Gbit/s, allowing for the capturing of 4K resolution, 12-bit images at over 60 frames per second. Oryx’s 10GBASE-T interface is a proven and widely deployed standard that provides reliable image transfer at cable lengths over 50 meters on inexpensive CAT6A, or greater than 30 m on CAT5e. On-camera features including IEEE1588 clock synchronization and full compatibility with popular third-party software supporting GigE Vision gives system designers the tools to quickly develop innovative solutions.

Features

• The Flir Oryx 10GigE ORX-10GS-32S4C-C 10Gbit/s transfer speed supports 4K60 (12-bit). Long cable lengths supporting CAT6A and CAT5e cables.
• Large 10GBASE-T install base supports a favorable consumer ecosystem. Full GigE Vision compatibility. Packet resend function for reliable image transmission
• IEEE1588 Clock Synchronization for precise timing across multiple devices. Color Correction Matrix, Gamma, Saturation, and Sharpness reduce host-side processing requirements.

The award winning Oryx 10GigE camera family allows systems designers to take advantage of the latest sensors by supporting transfer speeds up to 10Gbit/s allowing for ultra high resolution images on some models or lighting fast frame rate on others. Oryx’s 10GBASE-T interface is a proven and widely deployed standard
that provides reliable image transfer at cable lengths over 50 meters on inexpensive CAT6A, or greater than 30 m on CAT5e. On-camera features including IEEE1588 clock synchronization and full compatibility with popular third-party software supporting GigE Vision, gives system designers the tools to quickly develop innovative solutions.

The post ORX-10GS-32S4C-C appeared first on imRN Asia.

This Oryx model features the 31MP Sony IMX342 Pregius global shutter CMOS sensor and maximizes your imaging output by delivering 27 FPS over its 10GigE interface. The ORX-10G-310S9 is designed with flexibility in mind. With its flat front design, it provides easy support for custom optics or standard F-mount lenses with an optional lens mount accessory.

• Increase throughput by capturing 31 MP Global Shutter images at 27 FPS
• 10GBASE-T interface supports cables over 60m and makes
  multi-camera system set-up easy
• Develop innovative solutions quickly with GigE Vision compatibility and
  advanced on-camera features

The FLIR Oryx 10GigE ORX-10G-310S9C camera leverages the 31 MP, APS-C Sony Pregius IMX342 global shutter CMOS sensor ideal for high resolution applications including display inspection and archival imaging. Oryx’s fast and reliable 10GigE interface delivers 27 FPS over inexpensive switches and cabling.

The award winning Oryx 10GigE camera family allows systems designers to take advantage of the latest sensors by supporting transfer speeds up to 10Gbit/s enabling the capture of 4K resolution, 12-bit images at over 60FPS. Oryx’s 10GBASE-T interface is a proven and widely deployed standard that provides reliable image transfer at cable lengths over 50 meters on inexpensive CAT6A, or greater than 30 m on CAT5e. On-camera features including IEEE1588 clock synchronization and full compatibility with popular third-party software supporting GigE Vision, gives system designers the tools to quickly develop innovative solutions.

The post ORX-10G-310S9C appeared first on imRN Asia.

The Point Grey Flea3 is even smaller than the original Flea camera and is designed to have the form factor of similar industry standard analog cameras. The 800Mb/s interface enables full frame rate RGB image transmission and even more cameras on the same bus. The IEEE-1394b cable with jack screws allows a more secure connection to the camera.

The completely upgraded, cutting edge Point Gray Flea3 camera arrangement expands on the achievement of the super conservative Flea2 by adding new Sony picture sensors to the line-up. The Flea3 offers a large group of new highlights, including upgraded opto-confined GPIO; an on-camera outline support; non-unpredictable client information stockpiling; new trigger modes; and improved imaging execution.

FL3-GE-20S4C-C With resolutions ranging from 0.3MP (VGA) to 5.0MP and 12 different models to choose from, the compact, versatile Flea 2 camera system is a complete,
cost effective and reliable IEEE-1394b solution for demanding imaging applications such as semiconductor inspection and high-speed assembly.

There are twelve monochrome and color CCD versions in the Point Grey Flea3 , ranging from VGA to 5.0 MP. The Flea3 has the same compact, lightweight form factor as many industry-standard “ice cube” analog cameras, measuring only 29 x 29 x 30 mm and weighing just 38 grams. The Flea3 also includes a number of new features, such as improved opto-isolated GPIO, an on-camera frame buffer, and more.

The post FL3-GE-20S4C-C appeared first on imRN Asia.