Toshib Teli BU030CF : 1/3″ CCD, Color, VGA, Global, USB3.0, 125fps
Toshiba Teli BU Color BU030CF
Highlights
- The BU series is an integrated-(one-body)-type camera that adopts all pixel data readout interline CCD or CMOS.
- For video output and camera control, the USB 3.0 interface standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
This BU series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line
CCD. These are BU030 (VGA 1/3 type), BU031 (VGA 1/2 type), BU080 (XGA), BU130 (SXGA). Suffix
[C] is attached to the color models. For video output and camera control, the USB 3.0 interface
standard is adopted for high transfer rate, and it is easy to integrate into industrial equipment.
USB3.0 Cameras (BU series)
Key Products:
- High frame rate
- USB3.0 interface
- USB3 Vision®conformity
- GenICam Ver2.3 conformity
- IIDC2 Digital Camera Control Specification Ver.1.0.0 conformity
- e-CON Connector adoption
- Color processing (BU030C[F]/BU130C[F]/BU302MC[G/F]/BU505MC[G/F])
- Color processing (BU238MC[F]/BU302MC[G/F]/BU505MC[G/F]/BU1203MC[F])
- Global shutter
- Square grid arrangement
- Random Trigger Shutter
Features
- High frame rate
Supporting high frame rate, BU030 VGA 125fps, BU031 VGA 125fps, BU080 XGA 40fps, BU130
SXGA 30fps. - All pixel readout
All pixel signals (in the effective area) are output in one frame processing. - Full frame shutter
Since all pixels are output even in Random Trigger Shutter operation, high resolution can be
achieved, without deteriorating the vertical resolution. - Square grids
The CCD pixels arrayed in square grids facilitates computation for image processing - USB* 3.0 interface
Video output and camera control are performed via the USB 3.0 standard interface. Data transfer
is up to 5Gbps (Maximum) that enables to output uncompressed video data at high frame rate. - USB3 Vision* conformity
This product is based on USB3 Vision Ver.1.0. - GenICam* Ver.2.3 conformity
This product is based on GenICam Generic Interface for Cameras Ver.2.3 - IIDC2* Digital Camera Control Specification Ver.1.0.0 conformity
This product is based on IIDC2 Digital Camera Control Specification Ver.1.0.0. - e-CON* Connector adoption
The e-CON connector adoption enables to assemble the cable easily without using special tools. - Binning mode
B/W models have binning mode. In this mode, pixel data is combined by vertical and horizontal.
Vertical binning mode achieves high frame rate - Random Trigger Shutter
The Random Trigger Shutter function provides images in any timing by input of an external trigger
signal. Trigger control from PC is available as well. - Scalable
Selectable video output area. This mode achieves higher frame rate by reducing vertical output
area. And reduces occupied data rate of USB bus by reducing horizontal output area. - Color processing
Color models have built in color processing. There are RGB, YUV 4:2:2, YUV 4:1:1, Bayer and
Mono output modes.