The Basler acA750-30gc GigE camera with the Sony ICX409 CCD sensor delivers 30 frames per second at CCIR resolution.Using a Power over Ethernet (“PoE”) configuration, a single cable may be used to apply camera power and to transfer data between this camera and a PC, keeping cable runs to a minimum. An auxiliary connector is provided for terminating the input and output signal – there is one of each. The input may be configured to trigger image acquisition, reset the frame counter, or reset the software trigger count. The output may be configured to indicate acquisition trigger wait, exposure active, flash window, or timer active. Or the output may be controlled via a PC. The auxiliary connector may be used to power the camera if PoE is not available.
ace classic
The ace classic is the acA750-30gc starting point of our ace series and offers
a very cost-effective and reliable camera selection, with a standard
feature set for a wide range of applications. The ace classic includes camera models with CMOS
sensors from CMOSIS, e2V and ON Semiconductor (MT line) as
well as CCD sensors from Sony. It offers a broad selection of
interfaces (USB 3.0, GigE, Camera Link) and covers resolutions from VGA to 14 MP.
Highlights of the ace classic
- First of its kind and the most
successful camera series in
the Machine Vision market - CMOS and CCD sensors,
including NIR-enhanced
versions with an extensive
variety of pixel sizes - Wide interface selection:
USB 3.0, GigE, Camera Link - Standard Feature Set